ADBL PRO Slip 0,5L – PPF staðsetningargel
ADBL PRO Slip 0,5L – PPF staðsetningargel
Sleipiefni og staðsetningargel (e. positioning lubricant) sem gerir PPF vinnuna þína þæginlega!
Minnkar áhættu við ásetningu og hraðar vinnuferlinu.
2.490 kr.
Availability: Á lager
Related Product
ADBL PRO Slip 0,5L
PROFESSIONAL PPF INSTALLATION SLIP SOLUTION
Is an advanced slip solution designed for professional installation of PPFs, colour change films and window tints. Thanks to its specially developed formulation, it provides the perfect slip, facilitating precise positioning of the film without the risk of damaging the adhesive or formation of streaks.
Key features of the product:
– Dilution: 1:500 – 1:50, depending on the application needs and conditions.
– Safe for adhesive: it does not impact the adhesive structure, does not leave deposits.
– Easy rinsing: it can be effectively removed from surface using cold water.
– Defect reduction: it limits the pulling of adhesive and formation of lines after raising the film.
– Long-lasting slip: it maintains high slip on uncompleted surfaces, helping to adjust the film.
– Accelerated drying: it reduces the water evaporation time from underneath the film, accelerating the entire installation process.
ADBL Pro Slip provides indispensable help for film installation professionals that guarantees greater control, higher efficiency and better final results.
How to Use:
1. Dose a suitable amount of ADBL Slip depending on the required slip level (optimum 5 ml of ADBL Slip per 1 l of demineralized water, for elements requiring high tensioning and longer working time, we suggest 10-15 ml per 1 l of water).
2. Apply the ready solution onto the topcoat and liner sides of the film in order to remove impurities and neutralize the electrostatic effect and then remove it with a silicone squeegee.
3. Apply the solution onto the surface of the car to be covered with film and remove it with a silicone squeegee in order to remove dust and loose dirt. To be sure, you can repeat this step.
4. When pulling off the liner from the film, apply the solution of demineralized water and ADBL Slip directly onto the adhesive and then onto the car just before installing the film. Put the film on the car and then squeegee it to remove the solution that is present between the film and the paint. In order to close the film edges, i.e. rinse off the remaining ADBL Slip solution, use demineralized water with or without 20% IPA.
